High efficiency SMD LED strip per metre, consumes 8W per metre, the light it emits is distributed at an angle of 120º.

The LED strip is ADHESIVE and can be cut every 10 cm, in the points designated for cutting, i.e. where you will find the marked line or the scissors symbol.

For perfect IP65 protection, these connection points must be adequately protected using insulating tape or heat-shrink tubing.

Thanks to its very small dimensions, compared to other 220V strips, it is suitable in many narrow spaces or for small-width aluminum profiles.

It does not require a transformer and connects directly to 220V domestic electricity, it is perfect for decorating both external and internal spaces, it can be used to illuminate facades, shop windows, wardrobes, shelves, ceilings or stairs and other uses.

INSTRUCTIONS FOR ELECTRICAL CONNECTION:

In case you want a new connection, you need to strip it in the designated place (every 10 cm), eliminating a part of the silicone cover sufficient to insert the cable.

Once the cable has been inserted, use pliers or suitable equipment to press the electrical connection point firmly so that it fits well and insulate it with insulating tape or heat-shrink tubing.

WARNING:

- To order strips longer than 15 m it is necessary to select the total quantity of meters and specify the desired size when confirming the order in the "Add a message regarding your order" box.

Example: 1 single piece of 20 meters, 20 pieces of 1 meter, 1 single piece of 30 meters, 30 pieces of 1 meter,...

- It is possible to request strip kits up to a maximum of 50 meters long. It will be possible to cut the LED strip at every meter, so you can only make regular lengths. Example 1m 2m 3m...It is not possible to request lengths e.g. 1.20m, 2.40m, 3.60m...

- Without specifying the desired length in the comments, a single strip of length equal to the quantity indicated will be sent.

*** All requested cut-to-size strips are exempt from the right of withdrawal, being considered as a customized product.