50 meter coil of high efficiency SMD LED ULTRASLIM strip consumes 8W per metre, the light it emits is distributed at an angle of 120º.

The LED strip is ADHESIVE and can be cut every 10 cm, in the points designated for cutting, i.e. where you will find the marked line or the scissors symbol.

For perfect IP65 protection, these connection points must be adequately protected using insulating tape or heat-shrink tubing.

Thanks to its very small dimensions, compared to other 220V strips, it is suitable in many narrow spaces or for small-width aluminum profiles.

It does not require a transformer and connects directly to 220V domestic electricity, it is perfect for decorating both external and internal spaces, it can be used to illuminate facades, shop windows, wardrobes, shelves, ceilings or stairs and other uses.

INSTRUCTIONS FOR ELECTRICAL CONNECTION:

In case you want a new connection, you need to strip it in the designated place (every 10 cm), eliminating a part of the silicone cover sufficient to insert the cable.

Once the cable has been inserted, use pliers or suitable equipment to press the electrical connection point firmly so that it fits well and insulate it with insulating tape or heat-shrink tubing.

WARNING:

Do not turn on the coil while it is still rolled up for more than 1 minute, as it is very powerful the heat would accumulate and there would be the risk of damaging the entire coil.Therefore, it is advisable to unwind the coil before lighting.

It is recommended to install the strip on a metal surface to avoid overheating.