This controller can control at a distance of up to 30mt strips RGB 220v, thanks to its RF technology.
To use paired with the remote control (sold separately), you can make games of light and change the color of your strip.
The controller has a maximum load of 300w, operating on 220v dc , therefore you will need to combine a transformer suitable.
For each of the commands: on, off, color change, change in light or color variation it is necessary to wait a maximum time of 5 seconds from when the button is pressed.
MODE OF RECOVERY (from the remote):
Click on TO OFF for 3 seconds, otherwise click ON for a few seconds until the strip not to blink for 10 times.
More information on the remote control: : https://www.silamp.it/telecomando-per-controller-rgb-dimmer-led-silamp-30mt-controllo-remoto-p-23898.html
INSTALL THE LINKS:
Check that the unit is not present exterior damages . Pay attention to the links, as they can not be connected directly to the contrary.
The entrance (input) of the controller must be connected to the cables of 220V network: the PHASE with L (line) and NEUTRAL with No
The output of the controller connects to the strip, RGB LED 220V:
- B (blue): wire color BLUE - strip LED RGB 220V:
- G (green): wire color GREEN strip RGB LED 220V:
- R (red): wire color RED strip LED RGB 220V:
- + : wire to the POSITIVE + (plus sign) of the strip, RGB LED 220V:
See details in the following image.
SPECIFICATIONS
Brand
|
Silamp
|
Input voltage (Input)
|
220v AC
|
Output voltage (Output)
|
220v DC
|
Color control STRIP
|
RGB (red, green, blue) 220V
|
Signal
|
RF (radio frequency)
|
Power
|
300w
|
Protection index
|
IP20 (indoor use)
|
Materials
|
ABS
|
Color (finish)
|
White
|
Average duration
|
> 30.000 h
|
Certifications
|
CE and Rohs
|
Energy efficiency class
|
A+
|
The way of connection
|
cable común de voltaje
|
La distancia de la señal
|
Máxima de 30m
|
Intensidad de corriente máxima
|
1.5 A
|
Tamaño
|
85 mm x 45 mm x 23 mm
|
Contenido del paquete:
Ø 1 Controlador de LED 220V